Model Code SHDBM2 SHDBM3 SHDBM4 SHDBM5 |
Option Code:
Humidity Control
|
SDHUMID2
|
SDHUMID3
|
SDHUMID4
|
SDHUMID5
|
+ O/all Power (kW):
|
Included
|
Included
|
Included
|
Included
|
+ O/all Weight (kg):
|
+0.5
|
+0.8
|
+1.0
|
+1.3
|
1/1 Gn Removable 1 Litre Water
Tray Containers Supplied (Qty.)
|
2
|
3
|
4
|
5
|
Option Code:
Extended Prep. Shelf +
(Set) Cutting Boards
|
SHRPS2
|
SHRPS3
|
SHRPS4
|
SHRPS5
|
+ O/all Weight (kg):
|
+2
|
+3
|
+4
|
+5
|
+ O/all Model Depth (mm):
|
+150
|
+150
|
+150
|
+150
|
Cutting Board Depth (mm):
|
300
|
300
|
300
|
300
|
|
(Option) Humidity Control
(SDHUMID2), (SDHUMID3), (SDHUMID4), (SDHUMID5) Humidity Control Deep Option.
*Upgrade of std. digital control panel to include switched variable humidity control.
*Removable 40mm(H) x 1Lt. manual fill humidity water tray containers (supplied)
*Humidity tray heating source/ kW power supply included in main model.
*Welded steel tank base for accidental water spillage only – not for use as wet well.
*Factory fit only.
Humidity Control Operation.
Before switching on bain marie, fill containers supplied with water
as described below:
- Open rear sliding doors & remove the Gn pan support collars above.
- Use a jug to fill the 1/3 Gn x 40mm containers provided, after placing them in the front of bain marie tank. (Each container holds a litre of water).
- Do not add water directly into the main bain marie tank.
- Finally replace Gn pan support collars & fit the required Gn food pans.
- The deep bain marie can accept 4x 1/3Gn pans per 1/1 section. Depending on humidity control setting, humidity will be present for 4/5 hours.
(Option) Extended Prep. Shelf + (Set) Cutting Boards.
(SHRPS2), (SHRPS3), (SHRPS4), (SHRPS5) Prep. Shelf + Cutting Board Option.
*Extension To Rear Shelf In S/Steel – adds 150 mm to O/all depth.
* (Set) Removable Polyethylene Cutting Boards – White 300 mm (D).
*Factory Fit Only.