Introducing angled worktop sections to the design layout allows the back bar sections to become facetted, to create corners in the layout etc.
Hook on ‘blender shelves’ provide a perfect working platform for cocktails or smoothies. Spirit bottles can also be stored to hand, located in a hook on ‘speed rail’.
An optional secondary ‘add on speed rail’, hooks over the main speed rail to provide double the bottle storage capacity.
Or utilise the optional condiment sets by locating them over the worktop upstands, for bar fruit such as lemon slices, olives, peanuts etc.
Rear cover trims
Unit trim
|
Code
|
Function
|
Corner trim CT
|
Right angle corner joint
|
Double trim DT
|
Bridges 2 units
|
Single trim ST
|
Covers end unit
|
Angled trim AT
|
Joins 2 angled units in conjunction with worktop infills
|
|
Speed rails, condiment sets and shelves
Removable Speed rail
|
Code
|
Unit length(mm)
|
ASR45
|
450
|
ASR645
|
650
|
ASR80
|
800
|
ASR100
|
1000
|
Removeable speed rail
|
Fixed speed rail |
Code |
Unit length(mm) |
SR45 |
450 |
SR645 |
650 |
SR80 |
800 |
SR100 |
1000 |
Fixed speed rail |
Condiment set |
Code |
Unit length(mm) |
CS/2 |
450 |
CS/3 |
650 |
Removeable condiment set with 1/9 containers 65mm deep |
Blender shelf |
Code |
Unit length(mm) |
BS45/22 |
450 |
LBS65/22 |
650 |
Fixed blender shelf |
Infill worktops
Plain bridge worktop –‘bespoke’ sizes also available
|
Code
|
Unit length(mm)
|
PB45
|
450
|
PB65
|
650
|
PB80
|
800
|
PB100
|
1000
|
Perforated options also available e.g. drip tray type
|
Worktop angled |
Code |
Angle |
AT10 |
10 |
AT15 |
15 |
AT20 |
20 |
Special angles also available |
45 degree worktop corner top |
Code |
Angle |
CT45 |
45 |
Special angles also available |
90 degree worktop corner top |
Code |
Angle |
CT90 |
90 |
CTW90* |
90 |
*with inset wash basin waste and mixer tap |
High & Low Leg Support frames
High & low leg frames |
Code |
Unit length(mm) |
HLF |
450 |
LLF |
650 |
Fully welded/insulated tank |
End decor panel |
Code |
Unit length(mm) |
EP1 |
450 |
One EP1 decor panel required to finish the end of every run |
Roll-under bin
Roll under bin |
Code |
Unit length(mm) |
RUB45 |
450 |
RUB65 |
650 |
|
Downloads: general arrangement drawings
[Download not found] |
[Download not found] |
[Download not found] |
[Download not found] |
[Download not found] |
|
|
|